Applying a Handcuff Knot
By Lazarus Redmayne
This is how to properly apply the various handcuff knotsHandcuff knotA single knot that forms two adjustable loops side by side, sized to hold two wrists or ankles at once. Tightening one loop tends to loosen the other, so it is not a secure restraint on its own and is often locked off or backed up before any real load. Also called a hobble knot when used on the legs. on this site if you want to do a belly-chain-style configuration.
Quick Cuffs Multi-loop Handcuff Knot Prusik Cuffs
When used with PrusikPrusikA sliding friction hitch, usually tied with a loop of thinner cord wrapped several times around a thicker line, that grips firmly when weighted and slides freely when the load is released. Borrowed from climbing and rescue work, it lets a movable attachment point hold under tension yet be repositioned by hand. Named after Karl Prusik, the Austrian mountaineer credited with popularising it in the early 20th century.Prusik AnchorPrusik CuffsPrusik HeadPrusik Shackle Cuffs, I have seen many an eel completely stymied by this simple technique. In fact, I have only ever had one person escape from it and I steadfastly stick to the story that I simply didn’t apply it correctly. ;) (This is backed up by the fact that when I immediately re-applied it, she couldn’t get out a second time… but she might just have been exhausted.)
Rope Needed
For this tie, I used one 10' (~3m) piece of Natural 6mm provided by my affiliate Twisted Monk.
I use an amazing Natural hemp rope provided by my affiliate Twisted Monk. Check them out!
Prerequisites
Video
Pictures & Text
Use these same steps to apply any handcuff knot in a belly chain style configuration. For this tutorial I will be using a Prusik Handcuff knot, which is my favorite handcuff knot.
Place the loops over the hands with the knot and tail ends on the pinkie side.
This keeps it away from the thumbs and makes it much more difficult to attack
Tighten on the wrist. Tighten the loops so that your smallest finger can just barely be forced under the rope.
The knot will compress slightly when the person begins to struggle. This will open these loops a little. If you don’t want them to be able to wriggle out, the loops should be very tight at this stage.
Lock the cuffs by doing a single overhand knotOverhand knotThe most basic knot, made by forming a loop and passing one end through it. It serves both as a simple stopper and as the first move in building more complex knots. Drawn tight in thin rope it can be stubborn to undo, so it is used sparingly where a tie needs to come apart quickly.Overhand Knots like this.
Tighten this Overhand Knot very firmly.
Do not turn this into a square knotSquare knotA binding knot that joins two ends by tying two opposing half knots, left over right and then right over left, so the finished knot lies flat. Known in Japanese as hon musubi (本結び, roughly 'true knot') and in English also as the reef knot. It holds a bundle together reliably but tends to slip when used to join two separate loaded ropes, so it is chosen with that limitation in mind.Square Knot | Surgeon's Knot. As the person struggles, the knot will get much tighter and a square knot might become difficult to undo
Now you can use the free ends to attach your partner’s hands to something. For example: your partner’s waist to form a “belly chain”, keeping the hands away from the mouth so they cannot use their teeth to pull the knot apart. Run the trailing ends around narrowest part of the person’s waist…
…to their back
Form the first half of a Surgeon’s KnotSurgeon's knotA variant of the square (reef) knot with an extra turn worked into the first throw, so the added friction holds the wrapping in place while the second throw is set. The name comes from its use in suturing, where tissue must stay drawn together without slipping as the knot is finished. It is handy any time a binding needs to keep tension while being tied off.Square Knot | Surgeon's Knot by doing one overhand…
…then adding a second twist.
We need to pull this very tight as well as it will loosen slightly with struggle. Here we will shift angles so you can better see how I tighten it.
Holding one tail in each hand, I push my partner forward just a little with my thumbs.
As they tip forward, I pull on the rope to help them catch their balance and, at the same time, pull my hands apart…
…hard. This almost always results in being able to close this knot even tighter, resulting in a much more secure tie.
Keep tension on the ends as you bring them together so that you don’t lose the tightness you just achieved.
Finally, lock the “belly chain” by completing the Surgeon’s Knot. I keep tension on the ropes with my hands as I am creating the second Overhand Knot. Once it is formed I then..
…snap it closed. Again, very tight.
To see this in action, check out the video, starting at 1:16
Use up any extra rope you have in any way you like.
This is what is looks like from the front
Eels, begin your wriggling!
Another View - Pictures & Text
Create a handcuff knot
My favorite is the Prusik Cuffs, the Texas Handcuffs and Multi-loop Handcuffs definitely have their place :)
Once you put their wrists in the cuffs, "lock" them with an overhand knot
Tighten
Wrap the ropes around their waist in a sort of "belly chain", the begin to tie it off with a Surgeon's Knot
Complete the Surgeon's Knot
Tighten
See above for this being applied to a person



