Simple Flogger

This tutorial shows how to make a simple rope flogger using nothing but Double Overhand Knots and a few wraps!

When making a simple flogger, use 3/8” (8mm) or thicker so that the falls have the necessary weight. This tutorial uses 3/8”. (1/4” (6mm) rope can be used for floggers where each fall has two lines, but you’ll likely find it too light for designs were each fall as a single strand)

I highly recommend that you choose a soft synthetic fiber like pure nylon or MFP. When flogging somebody it is possible to scrape bits of skin off and have them lodged in your rope. If you flog somebody very hard it’s even possible to draw a little blood. Using synthetic fibers means that you can wash your flogger when necessary. Natural fibers will absorb body fluids and are impossible to get fully clean. Course and scratchy synthetic fibers like poly-pro are also not suitable; a flogger made out of poly-pro would scrape and scratch your partner a lot, perhaps beyond tolerance. (That said, I am using poly-pro to make this tutorial because it happened to be a bunch of cheap rope I had laying around when this project occurred to me XD )