Skip to main content
TheDuchy

Clove Hitch & Constrictor Knot

By Lazarus

These knots can be great for holding a bundle of ropes together as you are constructing your project

When I’m trying to hold a bundle of ropes together for purposes of tying a flogger, I use a small piece of electrical tape because doesn’t add more cords (and more confusion) to what I’m trying to tie.

But many people out there have a more purist approach and they want to use just rope, hands, and skill. If this is you, here are two techniques you can use to hold your project together while you were tying it: The Clove HitchClove hitchA hitch of two turns around a bar or post in which each turn crosses over the standing part, gripping by friction. It is quick to tie and adjust and is often used to anchor a line or begin a tie, but it can work loose if the object rotates or the tension pulls unevenly.Clove Hitch & Constrictor Knot & The Constrictor KnotConstrictor knotA binding knot, essentially a clove hitch with an extra tuck, that cinches hard around an object and jams against itself so tightly it often cannot be untied and must be cut off. It is prized for whipping rope ends and clamping bundles where a permanent, non-slipping grip is wanted. Its holding power also means it should not be tied directly on skin or anywhere circulation could be cut off.Clove Hitch & Constrictor Knot

These knots are almost identical except for one small but very important difference.

The Clove Hitch will hold things together reasonably well, but is easy to undo.

The Constrictor Knot will hold things together extremely well, but can be very difficult (in some cases impossible) to undo.

Video

Step by step

Step 1 of 15

In this example, we are working to bundle these ropes together in preparation for adding a multi-strand knot too our flogger project.