Esse clássico arnês peitoral, conhecido e praticado por riggers em todo o mundo, é simples, seguro e, quando aplicado corretamente, pode ser usado para suspensão. Usá-lo como seu principal arnês de fixação da suspensão da parte superior do corpo significa que o peso do seu parceiro é suportado pela caixa torácica e não pelos braços, reduzindo o risco de lesão do nervo radial, tão comum com o TK (Takate Kote) padrão. Confira também o Suspensão ShinjuA atualização do sistema é ainda mais interconectada e boa para a suspensão.
Essa amarração também pode ser usada para bondage de seios: aperte muito bem as tiras superior e inferior do tórax e, em seguida, use a linha que passa entre os seios para unir as tiras superior e inferior do tórax, prendendo e acentuando os seios. Outras técnicas de bondage de seios podem ser encontradas na seção Cross-your-heart Breast Harness e o Cinch & Wrap Breast Bondage tutoriais,
O vídeo mostra o método mais clássico de construir a tira superior primeiro. A versão ilustrada mostra uma alternativa em que construímos primeiro a partir da alça inferior.
Observações: Se você planeja usá-lo para suspensão, verifique se a tira inferior não está muito baixa. As costelas no centro e na parte superior do tórax são muito mais fortes e mais capazes de suportar o peso de uma pessoa com segurança.
Se estiver amarrando um corpo maior - não importa se é devido a músculos ou gordura -, você precisará de mais apoio ou ele se tornará insuportável rapidamente, portanto, acrescente mais voltas nas tiras superior e inferior. Em vez de parar com 2, como faço aqui, adicione 3, 4 ou até 5. Se precisar de mais corda, basta estender it 🙂
Para essa gravata, usei um pedaço de 30′ (~9m) de Natural 6mm fornecido pelo meu afiliado Twisted Monk. Mas meu modelo é bem pequeno e talvez você precise de mais.
Where should I put the suspension upline?. Is it around the upper straps?
Can this be safely used in conjunction with a tie that puts arms behind the back?
Certainly! In fact, that is my preferred way to do a box tie. I start with a Shinju, then put my partner into a Box Tie position, add a Somerville bowline around both wrists, then connect it up into the Shinju. If I want to trap the elbows, I use the tail of the SB to do to and might use a slightly modified Extended Lark’s Head Double Column of similar technique. But you could also do a variety of Armbinder or other techniques to trap the arms. Have fun exploring!
Would the bottom lines be tucked under the breasts if she wasnt wearing the suit?
Yes, directly against the skin of the chest, just below where the breasts connect to the chest. You normally want that strap of rope as high on the rib cage as you can get it and still be low enough that you don’t get any breast tissue under the rope.
Ive tried this with 8m rope only size I have so far. My partner isnt large but quite tall and the rope ended when making frontal V and this is with skipping half hitch at the back. I had to remove one upper wrap to make it work. What do you suggest here – extend the rope Then it will be too much I think.
In a case like that, I would try to consume more rope earlier in the tie. That is, I would actually add an *additional* wrap to the bottom strap and maybe to the top strap as well, then, when I run out, extend my rope with a shorter rope and use that to do the shoulder straps and front before locking off in the back.
When adding additional wraps to the upper and lower straps, above the 2 wraps shown in this tutorial, how often do you reverse the tension? If you reverse tension only once, I could see doing it only after the first wrap, or only before the last wrap. On the other hand, you could reverse the tension in between each wrap, but it also gets a bit messy, because you’d be creating another secondary bight on each reversal, and you’d have to choose which previously-created secondary bight to use for each new reversal. Is it okay to just wrap and have only one reversal either after the first wrap, or before the last wrap?
Yes, if adding multiple wraps, you can just continue going around until done, and then reverse at the end. If you do that though, lock it off with a stronger friction, like and X friction. You can see this being done in the Gote Shibari tutorial (albeit there there is only two wraps in that example, but this can be done with more). https://www.theduchy.com/takate-kote/
[...] esos intrincados arneses japoneses parecidos a sujetadores hechos completamente de cuerda? (Se não, veja isto.) A prática chamada Shinju Bondage, depois da palavra japonesa "perla", explica [...]
[...] encontrou uma foto desses intrincados sutiãs japoneses feitos inteiramente de corda? (Caso contrário, dê uma olhada nisto.) O costume é chamado de Shinju Bondage, seguindo a palavra japonesa para "pérola", [...]
[...] já viu uma foto desses intrincados sutiãs japoneses feitos inteiramente de corda? (A prática é chamada de Shinju Bondage, em homenagem à palavra japonesa para "pérola", explica Daniel [...]
[...] já viu uma foto desses intrincados sutiãs japoneses feitos inteiramente de corda? (A prática é chamada de Shinju Bondage, em homenagem à palavra japonesa para "pérola", explica [...]
[...] já viu uma foto desses intrincados sutiãs japoneses feitos inteiramente de corda? (A prática é chamada de Shinju Bondage, em homenagem à palavra japonesa para "pérola", explica [...]