This attractive harness is simple, fast to tie, and can be used for suspensions, but only side suspensions with the weave facing down, and only where the chest is even with or higher than the hips, as in a horizontal side suspension; do not use this for inversions. It allows you to have a single connection point that transfers the pressure to the opposite hip joint, nicely cradling and supporting your partner on a very strong part of their body. With practice, this can be tied in around 2 minutes.
This is a part of a series of related woven hip harness with similar features:
- Woven Hip Harness – One-Sided – Locked with Half-hitch (This tutorial)
- Woven Hip Harness – One-Sided – Rosette
- Woven Hip Harness – Two-Sided – Rosette
- The Leto Hip Harness
This variant is the fastest to tie, but also has the least friction in the weave. Depending on factors, some find that this version is more apt to tighten on the inner thigh. If that is the case for you, try the Rosette version to see if that suits you better.
Utilisez-le en combinaison avec un harnais thoracique de soutien comme le Shinju, RopeFairy's Caress ou Harnais de pêcheur (parmi beaucoup d'autres) pour permettre à votre partenaire de s'allonger sur le côté dans la corde. Pensez également à soutenir les jambes de votre partenaire, par exemple avec un simple La bouline de Somerville ou autre Colonne unique au-dessus de chaque genou ou des deux genoux et de la cheville, ou avec quelque chose de plus détaillé comme un Suspension Futomomo.
IMPORTANT : Ne pas utiliser cette si vous avez l'intention de renverser votre partenaire jusqu'à ce que sa tête soit plus basse que ses hanches. Ce harnais offre un grand soutien si la force est orientée vers le haut en direction de la tête et à n'importe quel degré entre cette position et une position droite sur le côté. Mais il faut noter que cette version n'a pas grand-chose pour l'empêcher de glisser vers le bas. Par conséquent, si la force est orientée vers le bas, vous courez le risque que le harnais glisse sur la hanche. Si vous prévoyez de faire basculer votre partenaire au-delà de l'horizontale, choisissez un autre harnais, un harnais solidement ancré à la taille, par exemple le modèle Harnais de tambour ou Leto Harness (tutoriel à venir).
Pour ce tutoriel, j'ai utilisé une pièce de 30′ (~9m) d'acier inoxydable. chanvre naturel 1/4″ (6mm). Prolongez votre corde si vous avez besoin de davantage de longueur ; utilisez-la s'il vous en reste trop à la fin.
J'utilise une incroyable corde en chanvre naturel fournie par mon partenaire Twisted Monk. Jetez-y un oeil !
Prérequis :
Contenu de la vidéo :
- Technique de base (0:21)
- Démonstration du point de connexion de la suspension latérale horizontale (6:31)
Ceci est illustré sur le côté gauche: Je vais attacher ce nœud de façon à ce que la trame soit sur le côté gauche de mon partenaire. Ce sera le côté gauche qui sera tourné vers le bas si cette cravate devait être utilisée dans une suspension latérale.
Pour ce faire, du côté droit: Dans les instructions ci-dessous, je vous demande d'utiliser la main droite ou la main gauche. En procédant ainsi, vous gagnerez en rapidité et en efficacité. Si vous voulez nouer le fil de façon à ce que la trame soit sur le côté droit, inversez tout ce qui suit. (Autrement dit, lorsque je dis "main droite", utilisez votre main gauche, etc.)
Longueur de la corde: J'ai utilisé une corde de 9 mètres. C'était suffisant pour cette personne particulière, avec cette carrure particulière, pour me donner un total de trois tours. Si je devais attacher une personne d'une autre corpulence ou si j'avais besoin de 4 tours, etc. Gardez à l'esprit que vous pouvez étendez votre cordeSi vous avez besoin de plus d'informations, n'hésitez pas à nous contacter.
Hi there!
Me (a 175 cm tall & 90 kg girl with a chubby build) and my partner (a 2 m tall & 100 kg athletic guy) tied this on each other and we’re running into the harness tightening itself around the thigh in a way that would end up being unsafe. We tried it over both clothing & bare skin, with 3 wraps & with 4 and the same issue arises – when weight is put into the harness the way it’s shown on pic 39, the part around the thigh starts tightening itself and it doesn’ really stop.
Is there any way to prevent this?
There are a number of reasons this might be, but my first suspect would be friction. If the rope itself has less friction between the strands, it can more easily slide in a configuration like this. So if, for example, you are using a synthetic fiber like nylon or mfp and you are feeling this effect, you may have a different result if you switch to a natural fiber like hemp which usually has greater ‘tooth’, i.e. more friction.
If you are already using a rope like that, you can add friction during the tying process by making sure there is enough tension in the ropes that the press into the skin for about 1/3 to 1/2 their diameter, and that you maintain that level of tension throughout the tie so that the weave is consistent and you can see the rope deflect around the other ropes as they go through the weave.
But before you spend time fiddling with that, I would suggest you try a different, related tie: https://www.theduchy.com/woven-hip-harness-one-sided-rosette/
This version does the lock off on the weave itself, automatically adding more friction. Try that version and see how it feels on you. Perhaps it is better suited to your needs.
Could you elaborate a little on the reasons behind avoiding inversion with this tie? Could you suggest a safe window in which your partner can be angled?
Certainly! I have updated it with the following: Do not use this if you intend to invert your partner to any degree where their head is lower than their hips. This harness provides great support if the force is angled upward toward the head and at any degree between that and straight out to the side. But note that this version does not have much keeping if from sliding down. Therefore, if the force is pointing downward at all, you run the risk of the harness sliding down over the hip. If you plan to have your partner tipped to any further than horizontal, choose a different harness, one that anchors solidly to the waist, perhaps the Drum Harness or Leto Harness (tutorial forthcoming).
Looking forward to trying this in a suspension. Tip: I had a lot of rope to burn. Too much to just wrap around the waste band, but not enough to go around both the waste and leg again. So I went just around the waste again, weaving it down and right back up and across the back.