Эта простая и популярная харнесс хороша для первого слоя на основе которого можно вязать что-нибудь ещё. Она очень похожа на Синдзю, но переднее кручение здесь находится в другом месте и не фиксирует пояса — это делает обвязку быстрее в вязании. "Бикини" — прекрасный выбор для работы на уровне пола, но не рекомендуется делать на её основе Подвес. Обратите внимание на Синдзю | Shinju или Синдзю для подвеса | Suspension Shinju чтобы научиться вязать что-то, что внешне похоже, но зафиксировано (!) и поэтому может использоваться в подвесе.
Плюсы: обвязка не предполагает особого риска.
Минусы: обязательно ознакомьтесь со статьёй "Травмы от верёвки" для получения важной информации об обвязках груди и влиянии тугих поясов (перевязей) на эту область.
Версия 2 демонстрирует способ эффективно распределить узлы — на случай, если вам хочется уложить партнёра на спину.
Вариант № 1 показывает, как затянуть обвязку туже для более плотного бондажа груди.
Для этого урока я использовал один 30′ (~9 м) кусок натуральной 6 мм верёвки, предоставленной моим партнером Twisted Monk. Но моя модель довольно маленькая, и вам может понадобиться больше.
Загляните к ним в магазин, у них отличные пеньковые верёвки!
Предварительно стоит изучить:
My model has a slightly larger than average frame, I used about 50ft of rope. Thanks for the tutorial!
Version 1 starts with wraps above the breasts and version 2 starts below. What is the best way to start?
I usually use version 2, building from the bottom up. It tends to generate less overall bulk as it doesn’t concentrate as many cords in one location.
Version 1 can be helpful if you *want* the cords concentrated. Perhaps you are planning to cinch the cords tight in the front as well for some breast bondage, for example.
I can understand how version 2 makes it less concentrated on the back, But why does version 1 start the wraps above the breast then?
Could version 1 just as well have started wrapping below the breasts with no implication?
What do you meen by your last comment about version 1 and tightness for breast bondage? 🙂
Hi very nice
Lazarus I just bought a posable mannequin for practice. This is the first tie I did on it. Thanks for all your work
Where do you get the mannequin to practice on?
I have an article on that! My “Model”
Thank you. I have since gotten a dress form mannequin with posable arms and it does a decent job for practicing ties that require more patience and looking at my laptop than any human I know would put up with
I was going to leave a comment asking about concerns around suspensions, then I remembered a conversation on the Discord server. I’m just going over to the suspension course.
A good note. This version is fast and smooth … but that means that it is not locked off at each band. Therefore, this version is not suitable for suspensions. Look to the Shinju for something very similar that *is* locked off.
I’m curious…any way to have the lower rope under the breast to be straight and not bent upwards by the tension of the rope between the breasts,
Sort of yes, sort of no. That shape is dictated by the tension of the two. If the lower chest strap is quite tight and the shoulder strap is not vary tight, it will not cause that change in shape. …However, the harness will also not feel the same to your partner. You can do it either way, but talk with your partner about how they feel in the tie one way vs the other…