Este es un arnés muy simple y popular y una buena primera capa sobre la que construir una unión adicional. Es muy similar al Shinju, pero pone el giro en el frente en un lugar diferente y no bloquea cada correa. Esto hace que sea rápido de poner y una buena elección para el trabajo en el suelo (bondage sin suspensión), pero no es una buena elección para suspensiones. Mira a la Shinju o Suspensión Shinju para algo con un aspecto muy similar, pero que * está * bloqueado para que pueda ser utilizado para las suspensiones.

Pros: Puedes hacer que esto sea bastante estricto sin un riesgo significativo

Contras: Asegúrese de revisar nuestra página de Seguridad para obtener información importante sobre los arneses de pecho apretados cuando se combinan con cinturones de sujeción apretados.

Versión 2 proporciona una mejor distribución de los nudos en la espalda, en caso de que acuestes a tu pareja.

Versión 1 se puede ajustar a los pechos con más fuerza para el bondage de pechos.

Para este tutorial, he utilizado un trozo de 30′ (~9m) de Natural de 6mm proporcionado por mi afiliado Twisted Monk. Pero mi modelo es bastante pequeño y puede que necesites más.

¡Checa para ver su cuerda de cáñamo increíble!

Requisitos previos:

13 Comments
  1. Spider B 2 años hace

    My model has a slightly larger than average frame, I used about 50ft of rope. Thanks for the tutorial!

  2. McFly 2 años hace

    Version 1 starts with wraps above the breasts and version 2 starts below. What is the best way to start?

    • Lazarus 2 años hace

      I usually use version 2, building from the bottom up. It tends to generate less overall bulk as it doesn’t concentrate as many cords in one location.
      Version 1 can be helpful if you *want* the cords concentrated. Perhaps you are planning to cinch the cords tight in the front as well for some breast bondage, for example.

      • McFly 2 años hace

        I can understand how version 2 makes it less concentrated on the back, But why does version 1 start the wraps above the breast then?
        Could version 1 just as well have started wrapping below the breasts with no implication?

        What do you meen by your last comment about version 1 and tightness for breast bondage? 🙂

  3. FHP 3 años hace

    Hi very nice

  4. redleg9 3 años hace

    Lazarus I just bought a posable mannequin for practice. This is the first tie I did on it. Thanks for all your work

  5. Rick 5 años hace

    Where do you get the mannequin to practice on?

    • Lazarus 5 años hace

      I have an article on that! My “Model”

      • Rick 2 años hace

        Thank you. I have since gotten a dress form mannequin with posable arms and it does a decent job for practicing ties that require more patience and looking at my laptop than any human I know would put up with

  6. SSGKnuckles 5 años hace

    I was going to leave a comment asking about concerns around suspensions, then I remembered a conversation on the Discord server. I’m just going over to the suspension course.

    • Lazarus 5 años hace

      A good note. This version is fast and smooth … but that means that it is not locked off at each band. Therefore, this version is not suitable for suspensions. Look to the Shinju for something very similar that *is* locked off.

  7. Jeremy 6 años hace

    I’m curious…any way to have the lower rope under the breast to be straight and not bent upwards by the tension of the rope between the breasts,

    • Lazarus 6 años hace

      Sort of yes, sort of no. That shape is dictated by the tension of the two. If the lower chest strap is quite tight and the shoulder strap is not vary tight, it will not cause that change in shape. …However, the harness will also not feel the same to your partner. You can do it either way, but talk with your partner about how they feel in the tie one way vs the other…

Dejar una respuesta

Inicie sesión con sus credenciales

¿Ha olvidado sus datos?